SFT SERIES – Modular TV TRANSMITTER – UHF – Air
High technology level in both TV Digital Signal Processing and RF domain
The SFT series reaches high technological levels in both TV Digital Signal Processing and RF domain. These transmitters grant stunning performances , have an extremely high configuration flexibility and can be totally controlled remotedly. The smart and compact design of these transmitters allows a quick and inexpensice maintenance, while the control panel and web interface makes it intuitive and easy to control and configure.
Model list
For more detailed and specific technical information download the brochure below
LOW POWER MODELS
- SFT102U/M
- SFT142U/M
- SFT351U/M
- SFT701U/M
HIGH POWER MODELS
- SFT103U/M
- SFT252U/M
- SFT372U/M
- SFT502U/M
- SFT622U/M
- SFT752U/M
TECHNOLOGIES
UAS
The Universal Adaptiveness System is the result of years of research and represents the state of the art of DTV transmitter technology worldwide. This system guarantees an incredible hardware configuration capability, using a very simple and intuitive software that is accessible both from the hardware itself and remotely. It is perfect for international broadcasters to increase the manageability of investments by reducing the types of transmitters and for national broadcasters thanks to its versatility in operating modes and configuration. The UAS can allow the user to set up the machine as a transmitter, heterodyne transposer, regenerative transmitter and gap filler, all in one hardware component.
SWDT®
SWDT® (Software Defined Transmitters) technology implement different modulation patterns, either digital or analog (DVB, ATSC, ISDB-T, DTMB, DAB, DAB+, T-DMB, ATV, etc.) in the same hardware. It allows an easy selection of the operating modes remotely, via SNMP commands, via TCP/IP or even via a dedicated command inserted into the transport stream.
APS
Anodized Protection System, is a special treatment applied to the surface of the aluminium body of the transmitters and to some of its components, preventing corrosion due to humidity or sudden changes in temperature and increasing reliability and longevity.
![blank](https://www.dbbroadcast.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
HSS
With the Hot Swap System present in the transmitters it is possible to carry out maintenance on the power supplies with the machine on and on the air in less than 5 minutes as well as for the amplifiers in modular transmitters. Even the cooling fans can be removed, cleaned or replaced in just 5 minutes thanks to their placement outside the machine.
![blank](https://www.dbbroadcast.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
RCS
Responsive Cooling System is an optimized and highly efficient cooling system. Thanks to the ability to react to changes in temperature of the transmitter or the environment, the system guarantees correct operation and optimal performance even in extreme climatic conditions or in the presence of high temperatures. The cooling system keeps the heat sink temperature at optimum levels.
![blank](https://www.dbbroadcast.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
AIR
The DB air cooling system not only prevents the device from overheating but extends the life of the transistors by far. In the transmitters and amplifiers the fans are mounted externally to allow easy and quick cleaning, or possible replacement, without opening or removing any module and without interrupting the operation of the transmitter.
![blank](https://www.dbbroadcast.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
LIQUID
An oversized heat exchanger, single or double (optional), suitable for outdoor or indoor installation, and equipped with single or double pumping system (optional) for maximum redundancy, is the main component of DB's powerful liquid cooling system. Thanks to the special design of the liquid cooled heat sinks inside the amplifier and the low pressure liquid distribution, this system ensures high reliability, cooling efficiency and ease of installation. Compared to the air cooling system, the liquid cooling system brings several advantages, such as:
- Correct operation even in extreme climatic conditions
- Significant reduction in the amount of air conditioning required
- Correct operation in dusty environments, with high humidity or salinity
- Very low acoustic noise
- Low thermal dispersion in the environment
- Longer life of transistors and active components thanks to their continuous operation at lower temperatures.
WEB
Extremely detailed and intuitive web interface with all main parameters fully controllable and adjustable. Ability to remotely check the status of the transmitter and set malfunction alerts via e-mail and/or trap for prompt intervention. Firmware that can also be updated remotely and an easy back-up system for personal data and configuration.
![blank](https://www.dbbroadcast.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
design
SMART DESIGN
Thanks to its research and development center, DB is constantly working to improve the design of its products so that the interaction between user and devices is always easier, more intuitive and maintenance faster and cheaper. The clever placement with direct access of the fans in the back and outside of the transmitters and amplifiers and that of the power units with easy access are the result. Such as the combination of latest generation RF combiner technology with ultracompact unbalancing dummy loads and a smart intercommunication interface between RF modules, drivers, and Logical Control System.
![blank](https://www.dbbroadcast.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
COMPACT DESIGN
![blank](https://www.dbbroadcast.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
HIGH SCALABILITY
The special design of the transmitters and amplifiers allows multiple configurations with high scalability which guarantees maximum flexibility and simplicity in the management of spare parts.
built-in tech
65:1
Device equipped with VSWR (Voltage Standing Wave Ratio) 65:1 built-in protection to prevent load mismatch failures.
OPTIONALS
Feel free to contact us for any type of assistance you need